Translate Klik Disini

Jual Mesin Cutting Mimaki

Mesin Cutting Mimaki ini bisa di pakai untuk die cut material untuk sablon kaos. Dengan dilengkapi sensor pembaca, dengan mendeteksi maksimal 4 poin, pemotongan dibuat dengan akurasi tinggi dengan meminimalkan distorsi pada saat pencetakan dan laminating.

Vast Design Konika Minolta 512

Vast Design KM512 The Vast Design Konica Series is ideal for high-volume production printing in excellent quality with innovative Konica Minolta KM512/14pl print-heads, Max. Resolution up to 1440dpi, 2mm letter is easy and clear to see.THK high-precision linear guider, Fuji servo motor enables higher carriage speed and lower noise.

Dilli-UV Printer Neo Titan

UV Printer Neo Titan Neo Titan's specially formulated, 6-color (CMYKLcLm) UV pigmented ink set offers a wide color gamut and excellent adhesion on a wide range of rigid substrates. Outdoor life is up to 2-3 years depending on application. The inks cure instantly and print on inexpensive uncoated rigid and flexible substrates.

Winjet Spectra Polaris

4 pieces of well known Spectra polaris 512 durable print heads. Deliver high saturation, high speed over 90m² /hr for outdoor billboard. Precise ink positioning improve printing effect. Rigid and heavy duty body structure support high speed motion

Hp Designjet 5100

HP designjet 5100 wheter you are just starting up or looking to take your business to text level, the HP Designjet 5100 Printer offers you a reliable and cost-effective 60 inch large format printing solution. Your business will benefit from exceptional speeds of up to 52 m2/hr, ease-of-use, and extended uptime.

Mimaki Flatbed Printer UJF-3042HG

UV LED Curing Technology :
As UV LED does not generate excessive heat, printing on heat-sensitive material becomes possible.

Simultaneous white over and under printing :
2 staggered heads arrangement enables simultaneous printing. White over and under printing achieves the same speed as color printing.

Environmentally Friendly Technology :
UV LED offers decisive energy savings, longer diode lifetime and a close to no VOC ( Volatile Organic Compounds) emitting printing environment. Compact and Easy Introduction : UJF-3042FX is themost affordable flatbed tabletop printer that is just the right size to be placed into any office.

Mimaki Flatbed Printer UJF-3042 FX


UV LED Curing Technology :
As UV LED does not generate excessive heat, printing on heat-sensitive material becomes possible.

Simultaneous white over and under printing .
2 staggered heads arrangement enables simultaneous printing.
White over and under printing achieves the same speed as color printing.

Environmentally Friendly Technology :
UV LED offers decisive energy savings, longer diode lifetime and a close to no VOC ( Volatile Organic Compounds)  emitting printing environment.

Compact and Easy Introduction :
UJF-3042FX is themost affordable flatbed tabletop printer that is just the right size to be placed into any office.

Mimaki Inkjet Printer CJV30-160

Spesifikasi :

ITEM
CJV30 - 160
Maximum print /
cut width
1,610 mm (63.3")
Print resolution
540 dpi, 720 dpi, 1440 dpi
Print mode
(Scan x Feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink
Kind
Exclusive solvent ink: SS21 ink, ES3 ink
Capacity
4-color mode: 440 cc cartridge x 2/color, 880 cc/color
6-color mode: 440 cc cartridge x 1/color, 440 cc/color
Media
Width
1,620 mm (63.7")
Thickness
Less than 1.0 mm
Roll weight
Less than 25 kg (55 lbs.)
Roll diameter
Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Maximum cutting speed
30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)
Cutting force
10-350 g
Applicable tools
Cutter, Water based ball-point pen,
Oil based ball-point pen
Media cutting
Cutting in Y direction by cutter on the head
Media heater
Pre/print/post heater
Media take-up device
Roll take-up device (Standard), inside/outside selectable
Command
MRL-III , MGL-IIc2
Interface
USB 2.0
Applicable standard
VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
CB report
Power
AC100V~240V, Less than 1,380VA
Operation environments
20°C~35°C, 35~65%RH (No condensation)
Dimensions
(W x D x H)
2,538 x 739 x  1,424mm
(99.9" x 29.1" x 56.0")
Weight
160kg (352 lbs.)

Mimaki Inkjet Printer CJV30-130


Spesifikasi :

ITEM
CJV30 - 130
Maximum print /
cut width
1,361 mm (53.5")
Print resolution
540 dpi, 720 dpi, 1440 dpi
Print mode
(Scan x Feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink
Kind
Exclusive solvent ink: SS21 ink, ES3 ink
Capacity
4-color mode: 440 cc cartridge x 2/color, 880 cc/color
6-color mode: 440 cc cartridge x 1/color, 440 cc/color
Media
Width
1,371 mm (53.9")
Thickness
Less than 1.0 mm
Roll weight
Less than 25 kg (55 lbs.)
Roll diameter
Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Maximum cutting speed
30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)
Cutting force
10-350 g
Applicable tools
Cutter, Water based ball-point pen,
Oil based ball-point pen
Media cutting
Cutting in Y direction by cutter on the head
Media heater
Pre/print/post heater
Media take-up device
Roll take-up device (Standard), inside/outside selectable
Command
MRL-III , MGL-IIc2
Interface
USB 2.0
Applicable standard
VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
CB report
Power
AC100V~240V, Less than 1,380VA
Operation environments
20°C~35°C, 35~65%RH (No condensation)
Dimensions
(W x D x H)
2,289 x 739 x  1,424mm
(90.1" x 29.1" x 56.0")
Weight
145kg (319 lbs.)

Mimaki Inkjet Printer CJV30-100

Spesifikasi :

ITEM
CJV30 -100
Maximum print /
cut width
1,020 mm (40.1")
Print resolution
540 dpi, 720 dpi, 1440 dpi
Print mode
(Scan x Feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink
Kind
Exclusive solvent ink: SS21 ink, ES3 ink
Capacity
4-color mode: 440 cc cartridge x 2/color, 880 cc/color
6-color mode: 440 cc cartridge x 1/color, 440 cc/color
Media
Width
1,030 mm (40.5")
Thickness
Less than 1.0 mm
Roll weight
Less than 25 kg (55 lbs.)
Roll diameter
Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Maximum cutting speed
30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)
Cutting force
10-350 g
Applicable tools
Cutter, Water based ball-point pen,
Oil based ball-point pen
Media cutting
Cutting in Y direction by cutter on the head
Media heater
Pre/print/post heater
Media take-up device
Roll take-up device (Standard), inside/outside selectable
Command
MRL-III , MGL-IIc2
Interface
USB 2.0
Applicable standard
VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
CB report
Power
AC100V~240V, Less than 1,380VA
Operation environments
20°C~35°C, 35~65%RH (No condensation)
Dimensions
(W x D x H)
1,934 x 739 x 1,424mm
(76.1" x 29.1" x56.0")
Weight
130kg (286 lbs.)













































  •  Some of the samples in this catalogue are artificial renderings.
  • Specifications, design and dimensions stated in this catalogue may be subject to change without prior notice(for technical improvements, etc).
  • The corporate names and merchandise names written on this catalogue are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Mimaki Inkjet Printer CJV30-60


Spesifikasi :
ITEM
CJV30 - 60
Maximum print /
cut width
610 mm (24.0")
Print resolution
540 dpi, 720 dpi, 1440 dpi
Print mode
(Scan x Feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
Ink
Kind
Exclusive solvent ink: SS21 ink, ES3 ink
Capacity
4-color mode: 440 cc cartridge x 2/color, 880 cc/color
6-color mode: 440 cc cartridge x 1/color, 440 cc/color
Media
Width
620 mm (24.4")
Thickness
Less than 1.0 mm
Roll weight
Less than 25 kg (55 lbs.)
Roll diameter
Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Maximum cutting speed
30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)
Cutting force
10-350 g
Applicable tools
Cutter, Water based ball-point pen,
Oil based ball-point pen
Media cutting
Cutting in Y direction by cutter on the head
Media heater
Pre/print/post heater
Media take-up device
Roll take-up device (Standard), inside/outside selectable
Command
MRL-III , MGL-IIc2
Interface
USB 2.0
Applicable standard
VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
CB report
Power
AC100V~240V, Less than 1,380VA
Operation environments
20°C~35°C, 35~65%RH (No condensation)
Dimensions
(W x D x H)
1,524 x 739 x 1,424mm
(60" x 29.1" x 56.0")
Weight
110kg (242 lbs.)













































  • Some of the samples in this catalogue are artificial renderings.
  • Specifications, design and dimensions stated in this catalogue may be subject to change without prior notice(for technical improvements, etc).
  • The corporate names and merchandise names written on this catalogue are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Share

Twitter Delicious Facebook Digg Stumbleupon Favorites