CG-130SRII | |||
Acceptable sheet width | 90-1,550mm (3.54"-61.0") | ||
Effective cutting area *1 | 1,370mm (53.9") | ||
Maximum cutting speed | 85 cm/s (33.5"/s) (at the angle of 45) | ||
Adjustable speed range *2 | 1-10cm/s:1cm step adjustment (0.39"-3.94" /s:0.39" step adjustment) | ||
10-60cm/s 5cm step adjustment (3.94"-23.6" step adjustment) | |||
Repeatability | 0.2mm / 2m (Excluding shrinkage / expansion caused by film temperature) | ||
Effective Repeatabilit | 1,350mm x 2m | ||
Pen pressure | 400g | ||
Range of down pressure | Cutter | 10-20g (2g step), 20-100g (5g step), 100-400g (10g step) | |
Pen | 10-20g (2g step), 20-100g (5g step), 100-150g (10g step) | ||
Acceptable sheet *3 | Vinyl up to 0.25mm (0.01") thickness, Fluorescent type vinyl, Reflective sheet | ||
Applicable tools *4 | Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool | ||
Type of command | MGL-IIc / Ic1 | ||
Interface | USB,RS-232C | ||
Receiver buffer size | 30MB Standard | ||
Operational environment | 5-35°C (41-95 °F), 35-75 %(Rh) Non-condensation | ||
Power requirement | AC100 V-240V, 120VA or less | ||
Dimensions (WxDxH) | 1,735mm (68.3")x580mm (22.8")x1,125mm (44.3") | ||
Weight (with stands) | 44kg (97.0lbs) | ||
All trademarks or registered trademarks are the property of the respective owners. Specifications are subject to change without notice. | |
*1: | Maximum sheet feeding length for differs depending on the software. |
*2: | Restricted sheet width. |
*3: | Provided that the blade specific for fluorescent type vinyl (SPB-0007) and the blade specific for reflective sheet (SPB-0006) are used. |
*4: | Thegoods on the market are φ8-φ9. Noguarantee for with accuracy and image quality. |
0 komentar:
Posting Komentar
Silahkan Meninggalkan komentar ???