Mimaki Cutting Plotter CG-60SR

Specifications

Model		CG-60SR
Acceptable sheet width		90-740mm (roll sheet:90-640mm), 3.6" - 29.1" (3.6"- 25.2")
Effective cut area*1		Normal : 586mm x 51m (23.1" - 167') Expand : 606mm x 51m (23.8" - 167')
Maximum speed		85cm/s (33.4"/s) pen-up speed at 45°
Adjustable speed range		1-10cm/s: 1cm step (0.39"-3.94"/s: 0.39" step) 10-60cm/s: 5cm step (3.94"-2.36"/s: 2.0" step)
Repeatability		±0.2mm (excluding shrinkage/expansion caused by the film temperature)
Guaranteed cutting range		586mm x 2m (23.0" - 78.7")
Maximum cutting force		400g
Range of down pressure	Cutter	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pen	10~20g(2g step), 20~100g(5g step),100~150g(10g step)
Acceptable sheet width		Marking film up to 0.25mm (0.001") thickness: Vinyl, Fluorescent type vinyl, Reflective sheet *2
Applicable tools*3		Cutter, Water based ball-point pen, Oil based ball-point pen
Command		MGL-IIc
Interface		USB
Receiver buffer size		30 MB (20MB when in sorting)
Operational conditions		5~35°C(41~95°F), 35~75%Rh, No-condensation
Power requirement		AC100V~240V Less than 100VA
Dimensions (WxDxH)		960 x 430 x 335mm (37.8" x 16.9" x 13.2")
Weight		18kg (39.7lbs.)

All trademarks or registered trademarks are the property of the respective owners. Specifications are subject to change without notice. Maximum sheet feeding length differs depending on the software. Provided that the blades specific to fluorescent type vinyl (SPB-0007) and reflectivesheet (SPB-0006) are used. Ball-point pen in the market can be used with the standard pen holder. The goods on the market are φ8-9mm(0.32"-0.35")pen. No guarantee with accuracy.

Posted in: