Mimaki Cutting Plotter CG-160FXII

MODEL		CG-160FXII
Acceptable sheet width		90mm~1,880mm (3.54”~74”)
Acceptable roll sheet		Outer less than φ200mm Roll weight less than 22kg
Effective cutting area*1		1,600mm×51m(62.9”×167’)
Maximum auto cutting width*2		1,720mm (67.7”)
Maximum cutting speed		100cm/s (39.3"/s)
Maximum moving speed		140cm/s (55"/s)
Adjustable speed range*3		1-10cm/s : 1cm step adjustment (0.39"-3.94"/s : 0.39" step adjustment) 10-50cm/s : 5cm step adjustment (3.94"-19.68"/s : 2" step adjustment) 50-100cm/s : 10cm step adjustment (19.68"-39.37" : 3.94" step adjustment)
Mechanical resolution		5µm(0.0002")
Command resolution		25µm or 10µm(0.001" or 0.0004")-MGL-IIc
Repeatability		±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Pen pressure		400g
Range of down pressure	Cutter	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pouncing	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pen	10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet*4		Vinyl up to 0.25mm(0.01")thickness, Fluorescent type vinyl Reflective sheet
Acceptable sheet for pouncing*5		Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Applicable tools*6		Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
Type of command		MGL-IIc
Interface		RS-232C,USB
Receiver buffer size		30MB Standard (20MB when in sorting)
Operational	Temperature	5~35°C (41~95°F)
	Humidity	35~75%(Rh) Non-condensation
Power requirement		AC100V~240V
Power consumption		130VA or less
Dimensions (WxDxH)		2,125mm(83.6")x 700mm(27.5")x 1,217mm(47.9")
Weight (with stands)		69kg(152 lbs.)

All trademarks or registered trademarks are the property of the respective owners. Specifications are subject to change without notice.
*1:	Maximum sheet feeding length differs depending on the software.
*2:	Sheet width to cut off from the roll.
*3:	Restricted sheet width.
*4:	Provided that the blade specific to fluorescent type vinyl (SPB-0007)and the blade specific to reflective sheet (SPB-0006)are used.
*5:	Pouncing tool intended specifically for pouncing shall be used.
*6:	The goods on the market are φ8~φ9 Pen. No guaranty with accuracy, and image quality.

Posted in: