CJV30 - 160 | |||||
Maximum print / cut width | 1,610 mm (63.3") | ||||
Print resolution | 540 dpi, 720 dpi, 1440 dpi | ||||
Print mode (Scan x Feed) | 540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi | ||||
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi | |||||
1,440 x 1,440dpi | |||||
Ink | Kind | Exclusive solvent ink: SS21 ink, ES3 ink | |||
Capacity | 4-color mode: 440 cc cartridge x 2/color, 880 cc/color | ||||
6-color mode: 440 cc cartridge x 1/color, 440 cc/color | |||||
Media | Width | 1,620 mm (63.7") | |||
Thickness | Less than 1.0 mm | ||||
Roll weight | Less than 25 kg (55 lbs.) | ||||
Roll diameter | Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1") | ||||
Maximum cutting speed | 30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45) | ||||
Cutting force | 10-350 g | ||||
Applicable tools | Cutter, Water based ball-point pen, Oil based ball-point pen | ||||
Media cutting | Cutting in Y direction by cutter on the head | ||||
Media heater | Pre/print/post heater | ||||
Media take-up device | Roll take-up device (Standard), inside/outside selectable | ||||
Command | MRL-III , MGL-IIc2 | ||||
Interface | USB 2.0 | ||||
Applicable standard | VCCI class A, FCC class A, UL60950, CE Marking (EMC directive, low voltage directive), CB report | ||||
Power | AC100V~240V, Less than 1,380VA | ||||
Operation environments | 20°C~35°C, 35~65%RH (No condensation) | ||||
Dimensions (W x D x H) | 2,538 x 739 x 1,424mm (99.9" x 29.1" x 56.0") | ||||
Weight | 160kg (352 lbs.) | ||||
0 komentar:
Posting Komentar
Silahkan Meninggalkan komentar ???